RAPIDS™ ROGUE AP DETECTION MODULE
      Unauthorized ‘rogue’ access points are a critical threat than can expose sensitive corporate data to intruders, and may undercut an organization’s entire regulatory compliance program (Sarbanes-Oxley, HIPAA, Visa’s CISP, etc.). Unfortunately, the most likely location for a rogue to be connected to your network is where it is hardest to detect: in remote offices without authorized Wi-Fi networks, hundreds of miles from your headquarters. AirWave’s RAPIDS rogue access point detection module will help you sleep at night, knowing that no unauthorized APs have been connected anywhere without your knowledge.

FEATURES + FUNCTIONALITY
      -Wired network discovery to locate wireless access        points anywhere on the network
       -Wireless detection of rogues within range of        authorized, managed access points
      -Integrated AirWave Management Client for        supplemental    RF scanning data from Windows        devices
      -Correlated alerts containing all data from both wired        and    wireless scans
      -Triangulation of rogue location through integration        with    the VisualRF module
       -High accuracy and low false positive rate through        rogue    scoring and OS interrogation
      -No proprietary sensors or hardware required for        accurate    rogue detection

Security
      The RAPIDS software solution uses a unique combination of wireless and wired network discovery techniques to detect and locate all rogue APs, wherever they may be. RAPIDS uses your existing, authorized wireless access points to locate any unknown radios within RF range. RAPIDS then scans your wired network to locate any other rogues that may not be within range of your access points. RAPIDS correlates results of the wireless and wired scans and delivers you a highpriority alert containing all the information you need to locate and remove the rogue device.

Management
      Using RAPIDS simple web-based user interface, you can initiate a global wired and wireless network rogue AP scan from a single console, as well as schedule ongoing automatic scans.

Visibility
      RAPIDS integrates with AirWave’s VisualRF module to calculate and display the physical location of any rogue access points, using RF data from your existing APs and the AirWave Management Client.

WiFi ROI
      RAPIDS leverages your existing wired and wireless network infrastructure and requires no proprietary sensors. It fully automates rogue AP detection, eliminating the cost of manual scans.

Wired Network Scans
      - Uses SNMP, HTTP, CDP, and other discovery protocols to identify all devices on your wired network
      -Interrogates devices with manufacturer default and configurable passwords to attempt to        definitively    “fingerprint” a wireless AP
      -Examines the MAC address of each device on the network and compares it to RAPIDS’        database of    9,000+ known MAC address ranges to identify devices with MAC addresses       commonly used by    wireless hardware manufacturers
      -Uses RAPIDS’ database of 1,700+ OS types to identify the device operating system to        help you    eliminate ‘false positive’ results (I.e., a device with an embedded OS is far        more likely to be a rogue    access point than devices with a Windows OS.)

Wireless Network Scans
      -Instructs authorized access points to scan the airwaves for other wireless APs (NOTE:        Most enterprise    -grade acess points now provide this functionality, but some older        models and SOHO access points do    not)
      -Uses Windows devices with the AirWave Management Client application to supplement RF        data from    existing APs. (NOTE: AMC is an AirWave-developed client application        available to all RAPIDS users)
      -Compares results of RF scans to the list of known access points to create a rogue list
      -Allows you to distinguish between ‘true rogues’ & ‘neighboring APs’ that are in RF        range but not    connected to your network

Rogue Scoring & Elimination of False Positive Results
      -Correlates rogue detection data from both wireless and wired network scans
      -Assigns each device on the network a score (from 1-5) reflecting the likelihood that the        device is a    rogue access point
      -Provides filters so you can see lists of the highest priority devices that are most likely to        be rogues    (scores of 5 or 4)

Alerts & Reports
      -Assigns alert priority (Critical vs. Major vs. Warning) depending on the rogue score
      -Generates automated email alerts containing all known information about the rogue        device, including:
      -Radio MAC address
      -LAN MAC address
      -Discovery method
      -SSID
      -Channel
      - Security settings
      -Switch port
      -IP address
      -Rogue summary screens display real-time, up-to-date information on all suspected rogues

Visualization
      -Integrates with AirWave’s VisualRF module to display the likely physical location of the        rogue device
      -Triangulates location based on signal level data from APs and the AirWave Management        Client
      -Location accuracy increases when the rogue device is discovered by more RF scanning        agents

Product Information
      -Linux-based server platform
      -Web-based user interface
      -Does not require proprietary sensors or other hardware
      -Includes a license to multiple copies of the AirWave Management Client
      -May be licensed independently of other AirWave software applications